UART 3.3-5V TTL GPS Modue GPS GLONASS dual mode M8n GNSS GPS Module Antenna Receiver,built-in FLASH,NMEA0183 FW3.01 TOPGNSS


Product features:
UBX-M8030-KT chipset
GPS+GLONASS
6PIN 1.25 connector with 2.54 pin pitch compatible design, easy to use test.
PIN definition:
Outline dimension:
Dimensions (LxWxH): 26 x 30 x8.9mm

|
|
GNSS CHIP |
M8030-KT |
frequency |
L1, 1575.42MHz,GLONASS L10F Bei Dou B1 SBAS L1 C/A:WASS, |
protocol |
NMEA 0183 v2.3,4.x GPS/QZSS L1 C/A,GLONASS L10F Bei Dou B1 SBAS L1 C/A:WASS, EGNOS,MSAS , Support Galileo E1B/C. Default GPS+GLONASS mode |
Available baud rate |
(Default 9600) Can be set 1200,4800,19200,38400,57600,115200 bps |
Receiving channel |
72 |
Sensitivity |
Tracking sensitivity:-160Dbm Capture sensitivity:-157dBm |
Cold start |
29s average |
Warm start time |
28s average |
Hot start time |
1s average |
Precision |
HorizontalPosition:Autonomous<2.5maverage, SBAS < 2.0m average |
maximum height |
18000 Meter |
Maximum speed |
515 m/s |
Maximum acceleration |
4G |
Update frequency |
1-10Hz(default1HZ |
A-GPS |
AssistNow on-line and off-line |
Working output level |
|
output level |
Output TTL level |
Physical characteristics |
|
PIN |
6 pin 1.25pitch GND,VCC3.3-5V.TX.RX.PPS.EN |
Dimensions |
30mm *26 mm * 8.5mm |
Operating Voltage |
3.3V-5.0VDC ±5% |
weight |
8.5g |
Connector form |
1.25 6 PIN |
Cable length: |
15 CM |
Operating temperature |
-40 to 85 |
Storage temperature |
-40 to 85 |